Alfaklei (M) - not flammable adhesive based on rubber. For the production of upholstered furniture and mattresses. Great for bonding different materials (foam, fabric, wood, foam rubber, felt, plastic, metal, etc.).

alfaklei (M) is non-flammable and odorless

High dry residue and viscosity, adhesive forms a permanently elastic, frost-resistant adhesive joint, it is absolutely odorless. Application of the adhesive may one-sided and two-sided. Adhesive application: automated production lines (compatible with other glues), the spray gun.

COMPOSITION
SBS-rubber, modifiers, methylene chloride.
PROPERTIES
the dry residue 50-52 %
the viscosity ( 3 to 4 mm) 85 - 115
color red / amber
open time 2 - 5 min (depending on t and layer thickness)*
density (specific gravity) 1.14-1.18 g/cm3
ignite - hoses should be metal, polypropylene with metal braid or sheath
odorless
frost resistant (can be transported at negative temperature, the temperature before use should be brought to 15 - 20 C)
Recommendations for use
The temperature of the adhesive and bonded materials must be from +15 to +26 C. At higher temperature the open time is significantly reduced. The adhesive is applied on the bonding surfaces. *Possibly one-sided and two-sided adhesive application. Consumption depends on porosity of surfaces. After applying the adhesive to the bonding surfaces joined and pressed against each other prior to the expiration of the open time. Adhesion should be carried out in a well ventilated area. Storage period in the manufacturer's original containers is 6 months. Store adhesive in tightly closed container at temperature not above +20 C. Do not expose to direct sunlight and heat sources.
Shipping:
Stackable cans - 10 kgs
Stackable plastic cans – 20kgs
Metal barrels - 200 kgs
Plastic containers – 1100 kgs